producten
PRODUCT DETAILS
Huis > Producten >
8.2-12.4GHz WR-90 WAVEGUIDE LOAD

8.2-12.4GHz WR-90 WAVEGUIDE LOAD

MOQ: 5 STUKS
Prijs: negotiable
Betaalmethode: L/C, D/A, D/P, T/T
Leveringscapaciteit: 500
Gedetailleerde informatie
Plaats van herkomst
China
Merknaam
Vinncom
Certificering
ISO 9000 ROHS
Modelnummer
VN-WGLD-0812-WR90
Artikelnummer:
VN-WGLD-0812-WR90
Werkende Frequentie (GHz):
8.2-12.4
Impedantie (Ohm):
50
VSWR:
≤1,03
Interface:
WR137(BJ70)
Productomschrijving

 

8.2-12.4GHz WR-137 WAVEGUIDE LOAD

 

  • Broadband operation
  • Low VSWR (Voltage Standing Wave Ratio)
  • Protection of sensitive transmitter components

WAVEGUIDE LOAD is not an option – it is a mandatory component in any non‑radiating waveguide setup. Always verify the power rating, flange type, and cooling method before deploying a WAVEGUIDE LOAD in your system.

A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.

oupler port. Ensure the flange type (e.g., UG, CPR, cover, choke) matches the system.

 

                             VN-WGLD-0812-WR90.pdf

Part Number VN-WGLD-0812-WR90
Operating Frequency ( GHz ) 8.2-12.4
Impedance ( Ohm ) 50
VSWR ≤1.03
Operating Temperature ( ℃ ) -40 ~ + 80
Interface WR90(BJ100)
Dimension(mm) As below
Handling Power 2 (Watt, max)
ROHS Compliance Yes
 
 
 
                                               8.2-12.4GHz  WR-90  WAVEGUIDE LOAD 08.2-12.4GHz  WR-90  WAVEGUIDE LOAD 1
 

Aanbevolen producten
producten
PRODUCT DETAILS
8.2-12.4GHz WR-90 WAVEGUIDE LOAD
MOQ: 5 STUKS
Prijs: negotiable
Betaalmethode: L/C, D/A, D/P, T/T
Leveringscapaciteit: 500
Gedetailleerde informatie
Plaats van herkomst
China
Merknaam
Vinncom
Certificering
ISO 9000 ROHS
Modelnummer
VN-WGLD-0812-WR90
Artikelnummer:
VN-WGLD-0812-WR90
Werkende Frequentie (GHz):
8.2-12.4
Impedantie (Ohm):
50
VSWR:
≤1,03
Interface:
WR137(BJ70)
Min. bestelaantal:
5 STUKS
Prijs:
negotiable
Betalingscondities:
L/C, D/A, D/P, T/T
Levering vermogen:
500
Productomschrijving

 

8.2-12.4GHz WR-137 WAVEGUIDE LOAD

 

  • Broadband operation
  • Low VSWR (Voltage Standing Wave Ratio)
  • Protection of sensitive transmitter components

WAVEGUIDE LOAD is not an option – it is a mandatory component in any non‑radiating waveguide setup. Always verify the power rating, flange type, and cooling method before deploying a WAVEGUIDE LOAD in your system.

A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.

oupler port. Ensure the flange type (e.g., UG, CPR, cover, choke) matches the system.

 

                             VN-WGLD-0812-WR90.pdf

Part Number VN-WGLD-0812-WR90
Operating Frequency ( GHz ) 8.2-12.4
Impedance ( Ohm ) 50
VSWR ≤1.03
Operating Temperature ( ℃ ) -40 ~ + 80
Interface WR90(BJ100)
Dimension(mm) As below
Handling Power 2 (Watt, max)
ROHS Compliance Yes
 
 
 
                                               8.2-12.4GHz  WR-90  WAVEGUIDE LOAD 08.2-12.4GHz  WR-90  WAVEGUIDE LOAD 1